Overheated engine

Engine overheating is a nightmare for every driver. After seeing the first symptoms of such a failure, it has little time to protect the engine from very serious damage. Check out what to do to get to the workshop.

Among the many indicators in the car to respond to information about the temperature of the liquid in the engine, we pay the slightest attention. Usually, its indications are simply in the standard, ie at the level of 90-100 degrees. However, if we notice – usually when standing in traffic on a hot day – that the tip is approaching 120 degrees, we have a problem. This means that the temperature is too high and the engine overheats.

Essential activities

In this case, set the heating and blower to the maximum. This may sound absurd – especially if a crash has occurred in a traffic jam when the outside temperature reaches 40 degrees Celsius – but it is better to spend a little time than to risk damaging the car. When warming up, we get a slightly warmer drive unit.

Check: Car paint scratch repair London – Micropaint

If the situation does not improve (or even deteriorate, for example, from the mask of the pair), let us ride on the shoulder and turn off the engine. Let’s carefully open the mask (make sure you do not burn it!) And let’s see if there are any leaks. With the plug removed from the expansion tank or coolant cap wait for several dozen minutes until the whole cooled down. Undoing just after stopping can result in burns! If we notice the loss of refrigerant, we should not immediately add it before cooling down.

In the absence of liquid, the distilled water can be replenished. Also, if you pour a different liquid than before and mix it, visit the workshop to replace the entire contents of the tank. It is important that the poured liquid or water has an ambient temperature and not lower.

If it does not overheat

However, if the symptoms of overheating persist, the cause of the malfunction is different. This may be a cooling fan failure or a breakdown of the thermostat or obey refused to pump the water. Unfortunately, in many modern cars, you can remove the thermostat outside the workshop. Also, the water pump fault is only repaired in the workshop. In case of failure of the fan, you can try to temporarily connect it “for a short time”.

Overheating counts fast reaction. Symptoms of this condition must not be underestimated, because engine repair may be unprofitable. However, care must be taken to avoid getting burned.

Steaming windows – driver problem

The pairing of windows is not only annoying, it is also dangerous. On the market are preparations advertised as ideal for this affliction. Should you use them? If so, in what situations? Are there other methods to combat glass fogging?

The windshield wiped off the engine of the car he saw probably every driver. Wiping them with a cloth or sponge does not produce any results, and the blower – despite the damned blowout – copes with this problem only after long minutes. Even worse when the windshield is steaming while driving because, in addition to the fact that it is a nuisance, it is also dangerous because of the significant reduction of visibility.

What to do with this trouble?

First, turn on the air conditioning. Unfortunately, not all cars are equipped with it. Also, remember that under certain temperatures the air conditioning compressor will not turn on.

Often recommended – and very good – the solution is to thoroughly clean the glass (also from the inside), preferably using a special liquid.

Also, replace the cabin filter. It often forgets about this element, but very much affects both the quality of the air we breathe in the car as well as the evaporation of the glass. Let us also consider whether we carry in the car damp objects. Dry the rugs, let’s look at the nooks. Of course, the weather is also important.

These ways of stained glass are usually effective. It is important to remember them especially with regard to the replacement of the cabin filter and the cleaning of the windows, since, in addition to the evaporation effect, these elements are important for cabin air quality and visibility.

Antifouling agents

There is one more solution to this problem. Speech of special anti-spattering agents, ie preventing the steaming. This type of formulation, thanks to special molecules, not only inhibits glass overlap but also repels water molecules, improving visibility in the rain.

Some people recognize the use of this type of chemistry as a last resort, but it is worthwhile to help fight the evaporation. Opinions about such measures are positive and the process of imposing them is not complicated. Also, the prices are not high.

How to impose this type of measure?

First, you have to thoroughly wash the glass. Later, when it is clean, we shake the packaging and apply it to it, spreading it with a spherical cloth or a microfiber cloth. Once slightly evaporated and a light, a white rash appears, polish another with a dry cloth.

Manufacturers say their preparations work for several weeks. The greatest efficiency in the fight against frosted glass will be achieved, however, combining the use of such preparations with other methods, such as replacement of the cabin filter or removal of moisture from the car.

How to protect the paint from the salt? Car body spray london


Frosts, if any, are small, snow as much as a cat wept. But salt on many roads and so it appears. It protects us from slipping, but also willingly destroys the bodywork of our cars. How to protect against it? Car body spray london renew the paint of your car.

The best protection against salt on the roads is purity. No, no roads – that they do not arrange it. It’s about keeping the car clean. We often see cars whose owners act according to the saying that “preserves the dirt.” Nothing could be further from the truth. Car body spray london take care of your car paint.

Continue reading “How to protect the paint from the salt? Car body spray london”

Some tips about wheel alignment and safety

On the road, the most important are safety, not only ours but also other road users. We must remember that an efficient car is the basis of safe driving. Appropriate balance and geometry of the wheel allow the driver to not only a good handling car but also the correct tire wear. It should explore the theme of wheel alignment and convergence tires. Thus, with the help of a hurry to give more insight about what’s going on and then recognize that in this area we have a problem.

Continue reading “Some tips about wheel alignment and safety”